Monster Lite/Infinity Single Bar Holder

Monster Lite/Infinity Vertical Mount Single Bar Holder
$51.00
Monster Lite/Infinity Horizontal Mount Single Bar Holder
$51.00

**WARNING: The Rogue Single Bar Holder should NEVER be mounted below a pull-up bar, and ALWAYS on the exterior of a Rack/Rig/Squat Stand. Failure to follow these guidelines may result in severe injury.

Single Bar Holder

A convenient, easy-to-mount accessory that allows you to store a barbell directly on the exterior of an existing Rogue rack, rig, or squat stand. The Single Bar Holder is compatible with both our Infinity and Monster Lite Series, with 5/8” hardware and mounting plate holes 4” on center. Once installed, almost any standard Olympic barbell can be placed sleeve-first into the Bar Holder’s 7” tall steel tube, creating a secure storage solution that won’t damage the bar’s knurling.

The Rogue Single Bar Holder should be mounted only on the exterior of a rig/rack/stand. As always, Rogue recommends keeping the area directly under pull-up bars clear of attachments at all times.

Single Bar Holder Specifications:

  • Made in the USA
  • Dimensions: 5.25” x 3” x 10”
  • Steel Tube: 7” height, 2” inside diameter
  • Applications: Vertical Barbell Storage for Home Gym, Weight Room, or Training Center
  • 5/8” bolts and fasteners
  • Holes in Mounting Plates 4” on Center
  • Mounting Hardware Included

Note:

  • Horizontal Mount Bar Holder is NOT compatible with S-Series Squat Stands, or Flat Foot Racks. Instead the Vertical Mount is recommended for use with these products.

Important: This barbell holder is compatible only with Infinity and Monster Lite Rigs, Racks & Stands. For our Monster version, see the Rogue Monster Single Bar Holder.

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Length 5.25"
Width 3"
Height 10"
Other Product Specs Holes in mounting plate at 4" on center. Mounting hardware included.
Steel Notes 2" Inside diameter steel tube.
Infinity Compatible Yes
Monster Lite Compatible Yes
Monster Lite/Infinity Single Bar Holder is rated 4.5 out of 5 by 10.
Rated 3 out of 5 by from Holds the bar, but has shortcommings It does what it's supposed to do, but needs to be improved imo. 1) the vertical bar holder can only be mounted on the sides due to lower cross members taking up hole real estate at the bottom. you cant bring it up higher on the front or the 7ft bar will be too high up. suggestion: offer slightly longer replacements screws and make the base of the bar holder longer in order to utilize the same holes as the cross members 2) it would be great if there was lining or a UHMW ring around the cup so that it would not scratch up sleeves (specifically specialty bars). 3) for straps or swing in safeties, you have to remove your bar in order to adjust when you have the bar mounted on the side... in hindsight i would have gotten the horizontal bar mount if I had known that. I guess I'd recommend it if you have no storage alternative, but I'd like to see a 2.0 version that addresses point 1 and/or 2 above.
Date published: 2016-02-23
Rated 4 out of 5 by from Updated to 4 stars for the Horizontal mount The horizontal mount allows you to have the space to adjust the strap safeties without having to remove the bar from the holder... And thank you to Rogue's excellent customer service for the exchange! a UHMW ring around the cup would make this a 5 star product
Date published: 2016-03-23
Rated 5 out of 5 by from Space Saving & Organization, Great Product Awesome if you have individual stations in your gym. Great for organization and space saving. Our members are great about putting equipment away as long as they know where it goes. These holders make it easy for our members and thus our trainers have less prep to do before and after classes.
Date published: 2014-08-15
Rated 5 out of 5 by from Super storage for very small gym I recently reviewed The Strip with the landmine attachment and loved it because it takes up virtually no floor space when not in use. I won't even go into all of the benefits of landmine exercises. Well, same applies to the single bar holder. Instead of leaning it in a corner or tripping over it on the floor the bar now has a safe home with no chance of falling or access. Any small basement/garage gym should consider The Strip and multiple accessories.
Date published: 2017-09-03
Rated 5 out of 5 by from Make it Fit!! Didn't think about it but my garage ceiling was too short, I couldn't fit the bar in. I have the Monster Lite with the footed base. Attached it to the foot, bar squeezed in! might help somebody with the same rack, and same ceiling height
Date published: 2018-07-26
Rated 5 out of 5 by from Minimalist Rack Accessory I can't believe it took me so long to make this purchase. I believe it's added way more functionality to my garage gym space and keeps things tidy and neat. Overall I would recommend it. I understand that it's not lined and could "scratch" the bar sleeve but we are throwing loads of plates on there anyway so no big deal!
Date published: 2018-05-23
Rated 5 out of 5 by from Great option if you have a limited amount of space I purchased the single bar holder about a month ago. It’s perfect for what I was looking for. Heavy duty construction holds a standard 45 lb bar with ease and is a perfect space saver. My only complaint would be that the holder does not have a protective lining so you may damage your bar if you are not careful.
Date published: 2018-03-17
Rated 4 out of 5 by from Space saver ! I've got a small home gym. Yes I've hypnotized my wife... So I had to save some space and where to put my barbell... Bought the S2 squat stand and add the vertical single bar holder. It's insanely well though! You earn space and it looks cool! The 5th stars are missed because, it's a little bit sketchy to put your beautiful barbell inside of it. I suppose it's just inside of my mind, I'm not engineer, but I feel like it's weird for the bar... Minor issue. Buy one if you need space!
Date published: 2018-08-15
  • y_2018, m_11, d_13, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_XX11357, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rogueapo