SHIPPING DELAY: 5-7 DAYS.
Online orders and operations are active. Retail store is closed. | Covid-19 Status

Monster Lite Short Plate Storage Post Pair

Monster Lite Short Plate Storage Post Pair
$44.75

Short Plate Storage Posts - Monster Lite

This is the Monster Lite version of Rogue’s Short Plate Storage Post—a practical, space-efficient addition to any existing Monster Lite Rig, Rack, or Squat Stand. Sold in pairs, these compact 5.75” pins add a combined 180 pounds of plate storage capacity without over-expanding a rig’s wingspan. Includes all of the necessary 5/8” hardware for mounting the storage posts to a 3x3” Monster Lite upright.

Specifications:

  • Made in Columbus, OH, USA
  • Sold as a Pair
  • Loadable Post Length: 5.75”
  • Steel Plate Storage Capacity (per post): 90 lbs
  • Bolted to Monster Lite uprights 6” on center
  • 5/8" x 4.5" hardware included

PLEASE NOTE: These weight storage posts are compatible ONLY with Rogue’s Monster Lite Series.

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Product Weight 6.5LB
Length 5.75"
Width 2"
Height 8"
Other Product Specs 5" usable post length
Monster Lite Compatible Yes
Storage Bumper Storage
Monster Lite Short Plate Storage Post Pair is rated 4.2 out of 5 by 10.
Rated 5 out of 5 by from Very nice fit and finish. This storage post goes well with my Monster Lite Rack, and could hold as much weight as you could manage to fit onto it. Quick and easy mounting, works great!
Date published: 2020-07-23
Rated 2 out of 5 by from Overall Fair but inefficient. I installed it on my wall mount and just not made for it as far as efficiency. The weights hung on the rack get in the way when using the rack for bench pressing. Other than that there meee do to the huge as bolts sticking out.
Date published: 2020-07-09
Rated 5 out of 5 by from Can be used for neutral pullups I installed two of these on a 43" cross member in place of my pull up bar in order to do neutral grips. I have them mounted horizontally but they seem to be plenty strong. I find the neutral pull up position a lot more comfortable than the standard pull up position and it works my forearms better-kind of like hammer curls. The slightly thicker grip is actually just fine.
Date published: 2020-03-15
Rated 3 out of 5 by from Good I bought these a while back and they work just fine. I do wish they were a little bit bigger around that way collars would hold plates on tight.
Date published: 2020-02-19
Rated 4 out of 5 by from Convenient storage Well built. Will hold at least 3-4 plates. Powder coat scuffs easily.
Date published: 2019-06-03
Rated 5 out of 5 by from Great plate storage Definitely sturdy as all Rogue products are. I can easily store multiple plates on the post. I opted to run the lock washer and nut on the inside of my RML-3W uprights to provide more room to store plates on the storage post. No more plates on the floor and changing out plates is convenient.
Date published: 2018-06-16
Rated 5 out of 5 by from Excellent feature I purchased these for two reasons. Two get my plates off the floor and add stability for swinging motions on the rack. I have an SML-2 squat rack with single pull-up bar and safety spotter arms. These add good storage and stability. In a compact space in my garage.
Date published: 2018-05-08
Rated 4 out of 5 by from Nice Addition to Rack Solid as all Rogue ML accessories are. Paper instructions that came with the product clearly picture the lock washer and nut on the storage post side so that they face any plates that are put on the post. But I felt that the bolt tip and nut was more likely to mar my bumper plates than the head of the hex bolt so I reversed it. From experience, I know that the lock washer can strip the powder coating when removed, so I decided to replace it with a flat washer and lock nut from the hardware store in case I decide to change where I mount the storage post. The other thing I did was coat the hex bolt head using "Plasti Dip" Spray. Pictures posted. This leaves a rubber like coating which I think will reduce the chance of marring the bumper plates. I put a 45 on the post and spun it. No marks on the bumper when making contact with the bolt head. The coating is thin though, so we'll see how it stands up to repeated racking of plates on the storage post.
Date published: 2018-02-12
  • y_2020, m_10, d_19, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_XX12405, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rogueapo