Rogue P-3 Pull-Up System

Manufactured in Ohio using the same 11-Gauge Steel as our full-scale rigs and racks, the versatile Rogue P-3 Pull-Up System is a single, compact unit designed for ceiling mounts (for a ceiling height of 8 to 9’6”) or wall mounts.* Once anchored securely to concrete or wood studs, the P-3 gives you the option of a bar position at either 14” or 22” from the wall/ceiling.

The complete P-3 Pull-Up System comes standard with a 52” Pull-Up Bar, and can serve as a dependable rings station, as well. If you want to expand the set-up for more athletes, you can daisy-chain additional brackets together by spacing them out 3-4 feet apart, then running a single 1” steel tube/1.25” OD pipe through all of the brackets (4 brackets, for example, would create a 12' pull-up bar). In most cases, this type of pipe can be purchased at your local hardware store.

*To allow for more space for kipping pull-ups, the larger P-4 Pull-Up System may work better for wall-mounting, as well as for ceiling-mounts in garage gyms with ceilings higher than 9’6”.

Recommended Setups:

• Distance between brackets: Concrete – 36", Wood Studs – 32" or 48"
• Height: 7' 6" - 8' on center of bar but this can be adjusted based on ceiling height or athlete height

All Rogue Pull-up Rig Assemblies are guaranteed against failure If properly installed!