Online orders and operations are active. Retail store is closed. | Covid-19 Status
P-4 Pullup Bracket

Rogue P-4 Pull-up System

P-4 Pull-up System

Availability: Ships in 14-28 Business Days

(2) Brackets & (1) Pull-up Bar
Mounting Hardware NOT included
Single P-4 Bracket
P-4 Brackets - 4-Pack
(4) Brackets
P-4 Brackets - 5-Pack
(5) Brackets
P-4 Brackets - 6-Pack
(6) Brackets
52" Pull-Up Bar

Rogue P-4 Pull-Up System

Manufactured in Ohio using the same 1x2" 11-Gauge Steel as our full-scale rigs and racks, the versatile Rogue P-4 Pull-Up System is a single, compact unit optimized for wall mounts and ceiling mounts*. Once anchored securely to concrete or wood studs, the P-4’s pull-up bar will be positioned at a 30” depth from the wall/ceiling. That’s 8” more than the depth of the P-3 Pull-up system, allowing more room for kipping movements.

The complete P-4 Pull-Up System comes standard with a 52” Pull-Up Bar, and can serve as a dependable rings station, as well. If you want to expand the set-up for more athletes, you can daisy-chain additional brackets together by spacing them out 3-4 feet apart, then running a single 1” steel tube/1.25” OD pipe through all of the brackets (5 brackets, for example, would create a 16-foot pull-up bar). In most cases, this type of pipe can be purchased at your local hardware store.

*For ceiling mounts, the P-4 is often the best option if your ceiling height is above 9’6”. If the height is between 8’ and 9’6”, a P-3 System could be a better option.


  • 1x2" 11-Gauge Steel
  • Depth: 30" from wall/ceiling
  • Width: Can be set on 16" Stud Centers or custom width up to 48" between brackets
  • Total Length: You can add brackets for miles by putting brackets in a row. 1"/1.25" Pipe can be purchased from local tube supplier in 24' lengths.
  • Orientation: This unit can be setup vertically or horizontally, our unique support arm will keep this rig sturdy!
  • Mounting Hardware NOT included.

Recommended Setups:

  • Distance between brackets: Concrete – 36", Wood Studs – 32" or 48"
  • Height: 7' 6" - 8' on center of bar but this can be adjusted based on ceiling height or athlete height

All Rogue Pull-up Rig Assemblies are guaranteed against failure If properly installed!

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Product Weight 37LB
Length 32"
Height 31"
Other Product Specs Weight Capacity: 500+LB
Pull-up Bar Depth: 30"
Steel Notes 1x2" 11-Gauge Steel
Rogue P-4 Pull-up System is rated 4.9 out of 5 by 107.
Rated 5 out of 5 by from Stoked as a goat! Awesome pull-up bar! Well built, solid, perfect thickness and finish, wide and deep. I mounted mine on an exterior garage wall with 24" studs on center, so was able to get the full length of the bar by having the brackets 48" apart. Though I hit the studs, I still opted for using 2x6 stringers for a couple reasons; I wanted to increase the surface area to avoid compressing the drywall, it adds some more depth from the bar to the wall, adds extra support, and looks awesome! Hardware I used was ten 4" long 3/8" lag screws with washers. The next size up at Home Depot was 6" long, which now that it's mounted confirms is unnecessary.
Date published: 2017-07-18
Rated 5 out of 5 by from Best pull-up bar Like all the other reviews have said, this is the best wall-mounted pull-up bar on the market. I went to specialty fitness stores that sold commercial-grade fitness equipment and they didn't carry anything like this. I wanted enough room for me and my wife to be able to do pull-ups next to each other at the same time, so I bought three brackets and stud-mounted them, and went to Home Depot to get a 100" long iron pipe (1" thick) that I got for about 20 bucks. I use it all the time and it's solid as a rock, no budging or anything on the wall. I'd give this 6 stars if I could!
Date published: 2016-09-14
Rated 5 out of 5 by from Simple, Easy, Perfect! So simple to set-up and install. Support frames are solid, welds are perfect and the matte-black finish feels and looks nice. The mounting holes are a bit big for any lag screw under 5/8". 5/8" were uncomfortably small for me so I went with 1/2" and they worked fine. Needed: 6 - 1/2in x 4in lag screws Drill 5/16" drill bit Pencil Level (Magnetic is a bonus!) (Optional) Socket Driver Bit & appropriate socket ^ Lags can be put in by a hand with a socket wrench but takes forever.
Date published: 2018-07-19
Rated 5 out of 5 by from Beyond Solid! I purchased the P-4 for kipping and bar muscle ups as my garage ceiling in only 7ft. I mounted it to bricks with 3/8 lag screws in lag anchors in all 3 holes with a little anchor glue. Had to add some wood to account for the lip between brick and cinderblock. Not quite a stringer but it helps with the support. It is as solid as a rock, feels like I could hang my car on it.
Date published: 2017-04-04
Rated 5 out of 5 by from A MUST HAVE FOR ANY HOME GYM I bought the P4 for my garage gym and it really exceeded my expectations. It is so hard to find this quality without purchasing from rogue fitness. It's rock solid. The product comes with everything except for lag screws and washers. Make sure you hit the stud directly in the center because you need a 3/8 lag screw and if its off center it may come loose. Pre drill the holes, use a level and a good stud finder and you'll have this bad boy up in no time.
Date published: 2015-08-16
Rated 5 out of 5 by from Perfect and Solid If you need a pull up bar installed on a wall, this is the one you want. It doesn't move an inch when kipping and has plenty of room for toe to bars. I believe you get what you pay for with this bar (and most rogue products). I installed into concrete block in my basement. Hardware I used: (6) 5/8 concrete anchors / (6) 3/8 3" lag bolts / (6) 3/8 washers. You will also need a 5/8 drill bit meant for concrete if you plan to use the anchors.
Date published: 2016-08-05
Rated 5 out of 5 by from I'm impressed! I bought this system last month and it blows away my expectations. I'm 230 and expected this to pull of the wall or bend. Nope! Solid as a rock and looks & feels like it will last forever. Watch the install video and go to the hardware store for lag screws. Took me about 30 minutes to install. Awesome system!
Date published: 2014-07-30
Rated 4 out of 5 by from Great quality! Wish they had the SPEAL bar option This is more of a comment than a complaint, but I hope it helps. Earlier this year, I purchased the wall mount pull up bar, and was disappointed to find out that the finish on the bar itself was different than the bars at my local box. I spent weeks sanding the bar & doing excessive amounts of pull-ups trying to ‘break-in’ my bar, to no avail. I’ve since learned that what I preferred is called the ‘Speal bar’. It would be great to have known this ahead of time, and to have had this type of bar as an option, or as some sort of add-on feature for those customers who prefer the feel of the metal when doing bar work. For the price we pay, it would be great to at least have this as an option. Overall the rig itself is of the highest quality and incredibly solid. I’ve been very pleased with how easy it was to assemble and how sturdy it is. Thank you.
Date published: 2017-11-02
  • y_2020, m_5, d_19, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_107
  • loc_en_US, sid_XX1632, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rogueapo