Online orders and operations are active. Retail store is closed. | Covid-19 Status

Rogue 9 Bar Holder


Availability: Ships in 14-30 Days

Rogue 9 Bar Holder

Barbell Storage Re-Invented

Rogue's fully redesigned 9 Bar Holder is unlike any other vertical barbell holder or storage rack in the industry. Manufactured in Columbus, Ohio, this compact floor unit features nine DOM steel tubes (drawn over mandrel) secured within two laser-cut sheets of 7-gauge steel. Because DOM tubing is noted for a smooth internal finish free from burrs and weld spatter, they’re ideal for protecting the sleeves of your barbells from unnecessary scratches.

With a footprint of just 18" x 18", the 9 Bar Holder can instantly organize and improve the efficiency of any training space, be it a garage gym or large strength and conditioning facility. The vertical, sleeve-first storage design keeps your bars’ knurling out of harm’s way.

Rogue 9 Bar Holder 2.0 Specifications:

  • Made in the USA
  • DOM Steel Tubing: 7” long, 2” inside diameter
  • 7-gauge steel
  • Dimensions: 18" x 18" x 8.5”
  • Finish: Signature Rogue Black Matte Textured


1.0 Laser cut top and bottoms, angle iron corners

2.0 DOM tubing (no sharp edges to scratch the bar), Laser cut and bent construction, Laser cut Rogue logo

9 Bar Holder New vs Old Comparison

Looking for alternatives to upright barbell storage? See Rogue’s Full Line of Bar Holders and Storage Racks.

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Product Weight 59.3LB
Steel Notes 7 Gauge steel
Foot Print 18" x 18"
Rogue 9 Bar Holder is rated 4.9 out of 5 by 52.
Rated 5 out of 5 by from Very Nice I got the 9 Bar Holder because I wanted something compact, yet sturdy enough to hold several different bars. This thing is definitely sturdy and protects the sleeves of the barbells well. I currently have a small EZ Curl Bar, Rogue Power Bar x2, Rogue TB-1 Trap Bar, EliteFTS Safety Squat Bar and Rogue MG-3 Bar stored in the holder. Saves me floor space and keeps everything organized. The alternative storage solution I had considered was the Gun Rack, however I did not want to deal with anchoring anything to the walls in my garage. As long as you are careful in removing/replacing the bars within the cylinders, I can't think of any reason as to why this bar holder could be thought of negatively. Great piece at a competitive price.
Date published: 2015-06-26
Rated 5 out of 5 by from Exactly as Described Heavy, solid, and durable. Great solution for barbell storage in a garage gym, without taking up a lot of floor space or anchoring a horizontal storage rack to the walls. I've used this daily for over a month now with no issues.
Date published: 2015-10-01
Rated 5 out of 5 by from Surpasses expectations I was surprised by the weight of this thing. It's fit, finish, and design are simply the best that you can buy. The only thing I would caution potential buyers of is that if you plan to use this in a room with an 8 foot ceiling, this holder is too high to hold all of your bars. A regular olympic bar JUST barely fits and its easy to hit the ceiling when removing a bar. My safety squat bar will not work with this holder. It's great for trap bars, EZ curl, and other bars that are not as long, or if your ceiling is higher than 8 feet, you're golden.
Date published: 2019-03-16
Rated 5 out of 5 by from A serious piece of steel I'm familiar with Rogue's typical overbuilt features, but underestimated how heavy-duty this bar holder is. Don't get me wrong: Rogue builds things to last for a lifetime and to hold up well in any setting, but I wasn't expecting this bar holder to be so heavy, sturdy, and exceptional. The only caveat, however, is that I have an 8 foot ceiling and my safety squat bar will not fit into this bar holder because the bar holder sits too high to allow the end of the SSB to lodge itself into the bar holder. All other bars...hex bar, olympic bars, E-Z curl, etc., fit perfectly. It was a workout just unpacking the bar holder and getting it down to my basement.
Date published: 2019-02-21
Rated 5 out of 5 by from Nice Not too shabby. Not the best bar holder, but far from the worst. It's nice.
Date published: 2017-02-20
Rated 4 out of 5 by from Near Perfection w/ a Caveat... Built like an absolute TANK. Purchased the 9 bar, not because I have 9 barbells, but because I have quite a few specialty bars, i.e.: 1x OPB, 1x Operator Bar, 1x TPB, 1x SSB, 1x Hex, 1x Öppen Deadlift Bar + 1 Rogue Curl Bar (7 bars, but 1 always on the rack). The 9 bar config allows me to position the specialty bars perfectly & far exceeds the convenience (along w/ wall space constraints) of the gun rack that I originally purchased. The only negative I have is that I wish the holders had some type of plastic/UHMW inserts, etc... to be a protect the sleeves. Metal on metal contact is similar to landmine attachments which could potentially damage the sleeves, so I've been carefully inserting the bars (though difficult with the awkward specialty bars) just in case...
Date published: 2020-07-24
Rated 3 out of 5 by from Works but could be better (can has inserts plz) Does what it’s supposed to, good price point but would be a lot happier if it had the plastic inserts to protect the bars at least the mouth of the tube and at the bottom. For a bunch of beater bars not a big deal but it started eating our gyms fancier only bars before we caught on.
Date published: 2019-05-17
Rated 5 out of 5 by from Seriously... If you dropped this from a 10 story building it would go 50 feet through the concrete. This thing is so solid it is highly unlikely it would tip even if the athletes don't put things away properly. Very impressed with my Defense Grade weapons rack.
Date published: 2015-04-21
  • y_2020, m_9, d_25, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_52
  • loc_en_US, sid_RA0524, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rogueapo