Rogue HR-2 Half Rack
$655.00
Rogue HR-2 Half Rack (90-70)
HR-2 Conversion Kit
$245.00
16" Pin/Pipe Safety Set
$49.25
For Use with Rogue HR-2 Half Rack Only.
SP3358 Plate Storage Pair - Long for Monster Lite
$49.75

Rogue HR-2 Half Rack

The customizable Rogue HR-2 Half Rack can be installed as a stand-alone unit or by converting an existing Monster Lite Series squat stand .

Manufactured in Columbus, Ohio, the HR-2 features the same 2x3” 11-gauge steel base and 48”x49” footprint as the SML-2, but incorporates an additional pair of 3x3” 11-gauge steel uprights and 17” crossmembers in the back of the unit. This gives the rack a huge amount of additional storage capacity and almost a foot and a half of inside depth for benching, rack pulls, and more. The Half Rack also offers a range of customizable options to best suit your needs—including the optional plate storage and pin/pipe safety sets, and a selection of different heights for the uprights themselves (90” or 108” for the front; 70” or 90” for the back).

IMPORTANT: If you already own a Rogue Monster Lite Squat Stand (SML-1, SML-2, or SML-3) and wish to convert it to an HR-2, we offer a Half Rack Conversion Kit that would include all the components and hardware you’ll need.

Specifications:

  • Made in the USA
  • Steel Notes: 2x3” 11-gauge base, 3x3” 11-gauge uprights
  • Footprint: 48”x49”
  • (1) Monster Lite J-Cup Pair included standard
  • (1) 43” Single Skinny Pull-Up Bar
  • Back Upright Height Options: 70”, 90” – Front Upright Height Options: 90”, 108"
  • Optional Add-Ons: 16” Pin/Pipe Safety Set; Plate Storage Pairs
  • Unit does not need to be bolted to the floor.

HR-2 Conversion Kit Includes:

  • (1) Pair Monster Lite Sticks (90" or 70")
  • (1) Pair HR-2 Half Rack Crossmembers
  • Conversion Kit Hardware Included

Compatible Accessories Include: Monster Lite Matador | Monster Lite Safety Spotter Arms

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Product Weight Varies based on Upright selection (225lbs - 255lbs)
Length 49"
Width 48"
Height Varies - 92 3/8" or 110 3/8""
Other Product Specs Westside Hole Spacing
Steel Notes 3 x 3" 11-gauge uprights, 2 x 3" 11-gauge base
Foot Print 48" x 49"
Monster Lite Compatible Yes
Rogue HR-2 Half Rack is rated 4.9 out of 5 by 22.
Rated 5 out of 5 by from Solid - Exceeds Expectations I purchased the HR-2 along with the safety spotter arms and AB-2 bench. This thing is solid. There is slight wiggle on a foam floor without being screwed down. the top of the 90" uprights will maybe sway a quarter of an inch. this only occurs if you forcefully try to swing left/right on the pullup bar, or grab each of the uprights and try swaying it side to side. there is zero front to back sway even when forcing. The HR-2 is much more solid than I expected and especially much more solid than most people need. The looks of the HR-2 are incredible as well. All-in-all id say this is an excellent product and well worth the money
Date published: 2014-10-04
Rated 5 out of 5 by from It's changed as my fitness needs have changed. Purchased back in 2014 and originally used it only as a squat rack. Over the years I've transitioned from weights to gymnastics as my connective tissue is in poor shape due to my desk jockey day life. Thanks to this rack, I can do both very effectively. The photos tell the story, but I'm even able to bench, press, and squat with the stall bars in place. I bolted this into concrete with Rogue's recommended concrete lag bots and bolt feet... the unit is rock-solid. I can even use the spotter arms as jerk blocks. If you're looking for a rack that is very compact, built like a tank, and can do it all, you've found it.
Date published: 2017-07-09
Rated 5 out of 5 by from Update to my SML 1 I posted a review of my SML 1 rack a month back ( included pics ) and decided to upgrade to the half rack after checking out a few reviews and pictures below in this thread. This setup for tight spaces is perfect. I didn't want...or have the room for another weight tree so this kills two birds with one stone. Doesn't take up anymore floor space and it looks amazing. Just like the squat rack itself, every nut and bolt lined up perfectly. No surprises. Highly recommended package.
Date published: 2016-02-18
Rated 5 out of 5 by from Black Beauty :-) Bough this last week, and it arrived 4 days later. How quick can it be? Rogue staff is very helpful, although they work primarily on email only. Took me 3 hours to assemble. I moved the back brace a little higher to accommodate my cable column which goes right behind the rack. Rock solid, which means it does not wobble at all. I also purchased Matador Dip attachment and upgraded Sandwich J-Hooks. Look great with my Ivanko revolver plates.
Date published: 2015-08-02
Rated 5 out of 5 by from Sturdy and space saving I am really enjoying this! It is very sturdy and fits well in my garage! It has everything I need and is a great investment!
Date published: 2016-09-21
Rated 5 out of 5 by from This the THE one for home garage owners!!!! I was so confused prior to this purchase on what I wanted. I was looking with the intention of putting this in one spot of a 3-car garage. I was considering options like the R-3 but wasn't exactly sure how permanent I could afford to be with securing a rack to the floor. After much deliberation I elected to go with the HR-2 along with the spotter arms and the rack storage. I am so glad I did this because not only is it super sturdy, but I've been able to easily adjust it's location a few times since setting it up to better optimize workout space in my garage. It is super solid and I have no doubt it can handle twice the weight I'll ever have sitting on it. And when the day comes that I have to move to a new home, all I have to do is take off the top bar and the bottom cross member and then two people can load it in a moving truck. The spotter arms are MUCH easier to adjust than the bars in an R-series rack so it makes adjustments very easy. I also like squatting/pressing OUTSIDE of the rack instead of inside. Highly recommended!
Date published: 2017-02-24
Rated 4 out of 5 by from Conversion Kit Review I bought the Conversion Kit for my existing SML-3 squat stand for 2 reasons: 1.) Extra space to store my extra plates so they don't get in the way when I bench (I'd have to unrack most of my plates so they wouldn't obstruct the bar path). 2.) Ability to do rack pulls. Bonus Feature: Weighs the unit down for even more stability (which was already good as it is). Overall the addition of the kit executed efficiently for my needs, however I had to remove a star for a design "flaw." The kit obviously comes with a pair of upright beams, the upright beam with the Rogue logo had the holes slightly "off center." Typically the logo faces OUT, so when I assembled it (w/ logo out) my ML Storage Channels wouldn't lock in at all ANYWHERE on that specific beam. I tested the storage channels on all 3 remaining beams and they were fine. I was frustrated as heck when on a whim I tested the plate storage facing INSIDE and it worked! I had to disassemble and rotate the upright beam so the logo faces inside and my plates would be on the outside of the rack. In the end I did not have to make a call to Rogue to fix anything, but just feedback as a consumer for something to watch.
Date published: 2016-08-13
Rated 5 out of 5 by from Perfect I bought this over 6 months ago and have not wanted to go back to the gym since! This thing is very sturdy. I would recommend this over a full rack just because you don't have to worry about getting the bar out from the middle to switch to another type of exercise. I do not crossfit, I prefer shocking the muscle.
Date published: 2015-10-12
  • y_2018, m_4, d_19, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_22
  • loc_en_US, sid_XX11797, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rogueapo