SHIPPING DELAY: 5-7 DAYS.
Online orders and operations are active. Retail store is closed. | Covid-19 Status

Rogue Kettlebell - E Coat

KB-9LB Rogue Kettlebell - E Coat
$25.00
KB-13LB Rogue Kettlebell - E Coat
$35.00
KB-18LB Rogue Kettlebell - E Coat
$40.00
KB-26LB Rogue Kettlebell - E Coat
$45.00
KB-35LB Rogue Kettlebell - E Coat
$55.00
KB-40LB Rogue Kettlebell - E Coat
$60.00
KB-44LB Rogue Kettlebell - E Coat
$65.00
KB-53LB Rogue Kettlebell - E Coat
$70.00
KB-62LB Rogue Kettlebell - E Coat
$80.00

Rogue Kettlebell - E Coat

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

What Sets the New Rogue Kettlebells Apart:

Material Ductile Iron Significantly more durable than traditional gray iron with a higher tensile strength and yield strength + greater corrosion resistance.
Finish E-Coat Known for its excellent adhesion, even coverage and toughness, our E-coat finish is applied in a thin durable layer that allows the texture of the casting to be felt while still being easy to clean.
Gloss ~22 GU Rating These KBs have a higher gloss appearance (approx 22 gloss units, or “semi gloss”) than our powder coat KBs [0.5 to 1.5 GU, or “low gloss”).

As noted above, Cadillac’s use of single-piece ductile cast iron creates a kettlebell that is stronger and tougher than standard gray cast iron. The electrically-applied E-coat finish—noted for its superior adhesion and corrosion resistance—also goes on thinner than a traditional powder coat allowing for a lustrous finish without losing the underlying texture of the casting. A flat, machined base allows for steady storage with no wobble, and the handle diameter varies from 1.2” to 1.5”, depending on the weight.

We’re proud to have developed this line with the team at Cadillac Casting, a privately owned Midwest foundry with nearly 100 years of history in metal casting, and an unmatched reputation for quality.

Fast Rogue Shipping
Your kettlebell(s) will be packaged safely and efficiently, and you’ll be able to follow the progress of your order from our factory floor to your door using the online Rogue Shipping Tracker.

Specifications:

  • Made In USA
  • Cast by Cadillac Casting, Inc.(Cadillac, MI)
  • Ductile Cast Iron Construction
  • Available Weight Increments: 9 LB to 88 LB
  • Bell Dimensions: Vary By Weight
  • Finish: Black E-Coat, Semi-Gloss
  • Handle Diameter: 1.2" (9LB-18LB), 1.4" (26LB), 1.5” (35LB-88LB)
  • Flat Base for easier storage, no wobble
  • Debossed Weight Indications and Rogue branding
  • Approved for US Army Combat Fitness Test (40LB KB)

See More: Kettlebells Available from Rogue

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Product Weight 9LB to 88LB
Length Varies by weight
Width Varies by weight
Height Varies by weight
Other Product Specs Black E Coat finish
Handle Diameter 9LB-18LB : 1.2"
26LB : 1.4"
35LB-88LB : 1.5"

Key Features of the Rogue Kettlebell - E-Coat

  • 1Made in the USA - Cast in Cadillac

    The town of Cadillac, Michigan has a long and storied manufacturing history, and Cadillac Casting, Inc., has been a big part of it, designing and producing a wide variety of complex and safety-critical components for the automotive industry and other industrial clients since the 1920s. This reputable, privately owned foundry employs 400 highly skilled workers, and they were more than equipped to produce the tooling for our kettlebells in-house.

  • 2Ductile Iron

    All sizes of the E-Coat Rogue Kettlebell are cast in ductile iron, aka nodular cast iron, which contains strong graphite nodules that make it considerably tougher than standard gray iron. Ductile iron is regularly used to make automotive components, wheels, gear boxes, and machine frames, and its superior tensile strength, yield strength, and corrosion resistance makes it an ideal option for a long-lasting, extremely robust kettlebell.

  • 3E-Coat Finish

    This electrically-applied paint coating was also initially developed for the automotive industry, due to its excellent adhesion, even coverage, and corrosion resistance. As a wet application, our gloss E-coat goes on thinner than powder coating, resulting in a smooth feel that retains more of the natural grit of the casting. While E-Coat Kettlebells will hold chalk, they are easier to clean than traditional powder coat KBs.

  • 4Gloss & Branding

    Because of the E-Coat finish, these Rogue Kettlebells have a semi-gloss appearance and a gloss rating of approx. 22 GU (gloss units), considerably above that of our standard powdercoat KBs, which rate between 0.5 and 1.5 GU. The black shine/gloss of the finish is complemented in the design by debossed lettering/numbering for the weight indications (both LB and KG) on one side of the bell, and Rogue branding on the other.

  • 5Wide Selection

    Whether you’re purchasing a single set of KBs for your garage gym or outfitting a large facility, this first series of Rogue E-Coat Kettlebells is available in a wide range of weight increments to suit any goal—from lightweight beginner bells (starting at 9LB / 4KG) up to 88 LBS / 40 KG. The handle diameters, noted below, range from 1.2” to 1.5”.Please Note: The actual weight of each kettlebell is designed to match the KG weight. So for example, the 35LB E-Coat Kettlebell is actually spec'd to weigh exactly 16KG with a +3% / -0% tolerance.
    Rogue E-Coat Kettlebell Handle Diameters:
    9LB - 18LB: 1.2"
    26LB: 1.4"
    35LB - 88LB: 1.5"

  • 6Approved for ACFT

    The 40LB Rogue Kettlebell has been officially approved for use with the United States Army’s Combat Fitness Test, a 6-event readiness assessment that replaced the previous 3-event Army Physical Fitness Test in 2020. The grueling new ACFT is neutral across all genders and age groups, and includes a strength deadlift, standing power throw, hand-release push-ups, sprint/drag/carry, leg tuck, and a 2-mile run.

Rogue Kettlebell - E Coat is rated 4.8 out of 5 by 392.
Rated 5 out of 5 by from Best Kettlebell on the Market! I recently purchased two 44lb Kettlebells from Rough Fitness. I own two other smaller kettlebell sets from two different manufacturers. They cannot compare to Rogue! If you want quality go ROGUE!
Date published: 2021-01-16
Rated 5 out of 5 by from Really good kettlebells. Really like the kettle bells. Will definitely order more to complete the set when I have money to afford shipping.
Date published: 2021-01-15
Rated 3 out of 5 by from Too small Nice bell but handle is too small to do two hand work with. Disappointed.
Date published: 2021-01-13
Rated 5 out of 5 by from This is the kettlebell to buy This is my all time favorite kettlebell. Coating is textured but not rough, smooth but not to slick. If you need extra grip, chalk up and you are good to go. I Will never go back to standard cast iron kettlebells.
Date published: 2021-01-13
Rated 5 out of 5 by from Solid bells at a great value I bought a number of these e-coat bells to begin building a set of double bells. The e-coat has a great grip to it and requires considerably less chalk thank my powder coat bells. I’m very tempted to replace my original set with more of these, considering they are such a great value. I’ve also noted that without a flat side, these bells feel very evenly balanced and appear so as well, especially next to my other higher valued 72 lb powder coat from a very popular brand (which has also corroded notably in less than a year). My only complaint is that i can’t purchase a 106 lb “Beast” to work up to in this great finish.
Date published: 2021-01-10
Rated 5 out of 5 by from Great weights When I pick them up it’s pretty hard but then it’s much easier when I put them back down. If you do this multiple times you get pretty tired which is cool. I’m sure you could find other uses for them like stopping papers from blowing away in the wind but I just keep picking them up and putting them back down where I found them and love it.
Date published: 2021-01-09
Rated 5 out of 5 by from Love it! I am a first time kettlebell user and just invested in some Rogue Kettlebells. I don't have any experience to compare them to other brands, but I am very happy with this.
Date published: 2021-01-08
Rated 4 out of 5 by from Great bells. Need chalk. I have 2 each of the 35s, 44s, and 53s of these e-coat kettlebells, and then a few of the standard Rogue Kettlebells with powder coat to round out my kettlebell collection. This is a good bell, but I find you do need to chalk up sooner than you do with the powder coat. The e-coat is slick.
Date published: 2021-01-07
  • y_2021, m_1, d_26, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_392
  • loc_en_US, sid_USC001, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rogueapo