Live Chat

Rogue RML-3W Fold Back Wall Mount Rack

★★★★★
★★★★★
4.9
586 Reviews
Made in U.S.A.

Rogue RML-3W Fold Back Wall Mount Rack

★★★★★
★★★★★
4.9
586 Reviews
Made in U.S.A.
$600.00
Product Description
Gear Specs
Shipping
Product Description

Space Saving Power Rack, Made in the USA

The design challenge was to come up with a wall-mount unit that could be folded inward or outward for space savings, yet still offer the sturdiness of our standard Monster Lite racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull up rig, or power rack, the feel is miles beyond lighter setups that use thinner steel.

Read More

ROGUE RML-3W FOLD BACK WALL MOUNT RACK

Space Saving Power Rack, Made in the USA

The design challenge was to come up with a wall-mount unit that could be folded inward or outward for space savings, yet still offer the sturdiness of our standard Monster Lite racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull up rig, or power rack, the feel is miles beyond lighter setups that use thinner steel.

A Rogue original Fold Back Rack is built with two 3x3" 11 gauge steel uprights, laser cut in Columbus, Ohio, with Westside hole spacing through the bench/pull area, and 2"-on-center spacing above and below. All steel is powder coated in the Rogue factory for a durable finish.

Optional Fold Back Rack Stringers

For optimal support, Rogue recommends adding a pair of stringers to your Fold Back Rack order via the menu on this page. Our custom-compatible stringers are made from laser-cut and formed 11-gauge steel and finished in our texture black powder coat. They measure 59" long x 10-1/8" tall, and extend 13/16" off the mounting surface when installed. One stringer is used to mount the top hinge brackets and the other for the bottom hinge brackets. You can learn more about our Fold Back Rack Stringers in the Key Features section below.

ATTN: Spotter Arm Use: How and what the rack is secured to on the wall should be checked by a contractor. Depending on the wall type and how it was secured will depend on if the wall can take that stress.

Gear Specs

Specifications

  • Made in the USA
  • Fully Retractable Power Rack
  • Uprights: 3x3" 11 gauge steel, 90.375" height
  • Inside Depth: Inside depth - 21.5" or 41.5"
    Stringer Not Included
  • (1) Set of Monster Lite J-Cups
  • (4) Mounting Brackets
  • (4) 5/8" x 5" Detent Pins
  • (1) Quick-attach Pull-Up Bar
  • (2) 5/8" x 4" Hitchpins w/ Lanyard for locking in Pull-Up Bar
  • (2) UHMW Plastic Caps to protect floor
  • Optional Stringer Pair: Laser-Cut 11-gauge steel, 59" long x 10-1/8" tall, 13/16" extension off the mounting surface

See More: Rogue Power Racks

Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Gear Specs

BrandRogue Fitness
Made In USAYes
Product Weight163LB or 190LB
LengthFrom Wall - 24.75" or 43.75"
Width56.1875" Overall (On Wall)
49" Outside Uprights
43" Inside Uprights
Height90.375"
Foot Print24.75" or 43.75" x 56.1875"(On Wall)
Steel Notes3x3" 11 gauge steel
Other Product SpecsInside depth - 21.5" or 41.5"
Stringer Not Included
Monster Lite CompatibleYes

KEY FEATURES OF THE RML-3W

1

HEAVY GAUGE AMERICAN STEEL & HARDWARE

The RML-3W uses heavy-duty 3x3" 11 gauge steel uprights with 5/8" diameter SAE grade 5 bolt hardware. Laser cut holes and heavy duty hardware maintain maximum strength. The RML-3W rack is compatible with most of our exclusive ML accessories and add-ons. Start with the Fold-Back as your base, and build your arsenal over time.

2

CHOICE OF DEPTH

The Fold Back Rack is available in two depths: 21.5" and 41.5". In the 21.5" version, the sides of the rack will position flush against the wall whether you swing them inward (towards each other) or outward. With the 41.5" depth rack, the sides can still fold in or out, but if both are moved inward, there will be a slight overlap—so to open up max space, you'd want to fold either both sides outward or one inward and one outward. For most setups the 21.5" is the best choice. Choose 41.5" if you need more space in the rack for gymnastic movements.

3

FIT, FINISH & LIFETIME WARRANTY

Every weld at Rogue is inspected individually at each step of the process for integrity and appearance. Each laser cut is inspected. Every part is again individually inspected for finish after the powder coat process. The entire package receives a final comprehensive quality assurance check before it’s shipped. The RML-3W is guaranteed by Rogue for Life.

4

SPACE EFFICIENCY

The detent pins included with the Fold Back Rack conveniently lock the rack into either the open position (ready for use) or closed position (against the wall). When stowed away, the rack takes up less than 5" of space from the wall, meaning you can have a world-class power rack in your garage without having to park your car on the street at night. Maximize your space with our efficient Wall Storage options to save even more space.

5

EASY INSTALLATION + OPTIONAL STRINGERS

Each unit comes standard with a Quick-Attach Pull-Up Bar, (4) mounting brackets for installation + all necessary hardware, a set of J-cups, and (4) detent pins. Having holes 2" on center allows for some choices in mounting the swing arms, which can be important if you need foundation clearance. Customers can also choose to add a pair of Fold Back Rack Stringers to their order at an additional cost [Highly Recommended]. The 11-gauge steel stringers feature pre-cut slots, allowing users to mount them to a standard wood stud wall (4 studs required for installation). Our stringer pair comes with all required hardware (3/8" x 2-1/2" black wood lags and washers), but any customers attempting to secure the stringers to a wall construction other than wood stud will be responsible for acquiring the correct hardware.

Stringer Installation

Recommended Products

Reviews

NickDejong
Grande Prairie, Alberta
★★★★★
★★★★★
2 weeks ago
Good quality but end plastic caps did not fit
The end caps that fit inside the Tube steel did not fit - slightly too big. If the tube was perfectly square, yes it may have fit. Recommend making the end cap piece slightly smaller so the piece is a slight clearance instead of inference.
Yes, I recommend this product
Originally posted on roguecanada.ca

Response from Rogue Fitness:

1 week ago
We're sorry to hear about the end cap issues! Our team is reaching out now.
Anon
Cairns
★★★★★
★★★★★
5 weeks ago
Solid!!
Great use of materials, making it heavy duty. Even if your floor is out of level, there is enough tolerance in the arms to correct itself. Super impressed
Yes, I recommend this product
Originally posted on rogueaustralia.com.au
Jen C
Canberra ACT
★★★★★
★★★★★
April 5
Solid as a rock, easy to install.
This rack is perfect in my gym. Easy to install and feels really solid. Takes up hardly any room when folded. I watched a few videos before I installed and followed someone’s recommendation to use decking screws for temporary holding of the stringers - worked a treat.
Yes, I recommend this product
Installed rack
Originally posted on rogueaustralia.com.au
JVelasquez
Richmond, Va
★★★★★
★★★★★
March 31
Love IT! Built Tough!!
I bought this a month ago and installed it myself. The stringers totally made this a lot easier to install than if I didn’t have them. I’m average in the “handy” department and I only had to
Yes, I recommend this product
Originally posted on roguefitness.com
Some Canuck
Vancouver bc Canada
★★★★★
★★★★★
March 3
Top notch piece of equipment
Loving my rack. Quality is awesome. Service was 10/10. Had some shipping damage and rogue took care of it. I recommend the product and the company
Yes, I recommend this product
Perfect fit in my little space
Originally posted on roguecanada.ca
Nikoladze
Tblisi
★★★★★
★★★★★
February 21
Homegym
Due to the fact my gym was closed i came to the conclusion i needed a home gym. I wish i came to this idea earlier. I have better equipment now and i save a lot of time. I bought the Rogue RML-3W Fold Back Wall Mount Rack with the Rogue Bolt Together Utility Bench. They're sturdy and strong. The Rogue Echo Bar 2.0 together with the Rogue RR Plates are high quality, and the Rogue HG 2.0 Collars prevents the plates from moving. If you want to build a homegym and want some high quality equipment, Rogue will not dissapoint you.
Yes, I recommend this product
Originally posted on rogueeurope.eu
Matteren
Irvine, CA
★★★★★
★★★★★
January 23
Great Rack
I bought this 4 months ago. Highly recommended. It is foldable and built like a tank.
Originally posted on roguefitness.com
Dell
Newcastle, AU
★★★★★
★★★★★
January 7
Quality and ease
Great rogue quality as always, online ordering was easy and really fast even with covid and Christmas
Yes, I recommend this product
Originally posted on rogueaustralia.com.au
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery