Online orders and operations are active. Retail store is closed. | Covid-19 Status

Rogue Vertical Plate Tree 2.0

Rogue Vertical Plate Tree 2.0

Availability: Ships in 14-30 Days

Extra Set of Wheels
Includes 4 wheels & hardware

Vertical Plate Tree 2.0

The simple, old-school plate tree is still the gold standard when it comes to efficient bumper storage at affiliates and garage gyms around the globe. That said, there’s always room for a little refinement. Rogue’s updated Vertical Plate Tree—built in the USA—improves on traditional models with a reinforced triangle-plate base, optional wheels for mobility, and re-positioned posts that enable full-size Oly plate storage on all three tiers. The unit’s new bolt-together design also reduces shipping costs while maximizing overall stability.

Compatible with any and all IWF standard Olympic plates, the Vertical Plate Tree 2.0 is equipped with six 12” long storage posts (three on each side) constructed from 1.5” Schedule 40 pipe. Each of the posts on the roughly four-foot tall tree are evenly spaced at 18.275" on center to offer a good mix of versatility and storage capacity.

*Please note that any metal-to-metal contact with the coated storage posts (such as adding and/or removing plates) may cause wear on the finish over time.*


  • Made in the USA
  • 26" , 12" post length L x 24" W x 50" H
  • New, Bolt-Together Base Design w/ Triangle Plates
  • (6) 12” Plate Storage Posts – Schedule 40 construction
  • All 3 Tiers compatible with Full-Size 450MM / 1.9" OD Olympic Plates
  • Weight post spacing: 18.275" on center
  • Optional Set of (4) Wheels Available (Imported)

See More: Plate Storage Units Available from Rogue

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Length 26" , 12" post length
Width 24"
Height 50"
Rogue Vertical Plate Tree 2.0 is rated 4.8 out of 5 by 114.
Rated 4 out of 5 by from Pretty great, not without flaw. Cons: Came with dents and paint removed in areas, typical of Rogue products I receive. The top tier holds change plates, but I wish was taller so I could store more bumpers. Change plates are small and there's no way the top rack will be fully utilized. The bolts get in the way of storing more plates on the bottom tier. Pros: Holds bumper plates and doesn't seem to be phased by the weight. Sturdy and heavy just by bolting it up, which only takes 5-10 minutes with casters. Overall it's a good value. Rogue seems to be invested in creating quality products and this is no different. However it's the little details that they often miss out on which means this is not a 5 star product.
Date published: 2016-02-23
Rated 5 out of 5 by from Awesome Tree This is a super sturdy plate tree and another superior product by Rogue! I have to chime in on the comments about the bolt that protrudes into the bottom tier restricting some valuable real estate where another plate would fit on or at least not leaving one barely hanging on. This bolt I believe is a 5/8 diameter but more importantly is 3 1/2 inches long. I went to the local hardware store and bought one in a 3 inch length instead. This 3 inch bolt will catch just enough to torque down and be flush on the exit side of the nut. It clears up a 1/2 inch of space. It may not sound like a lot but it will make differences depending on the combinations of plates on this one side of the lower tier.
Date published: 2016-10-04
Rated 5 out of 5 by from Great storage rack!! I bought this plate storage rack for my garage gym so that my weights weren’t stacked up on th floor. Not only does it save space and look badass, but it’s super sturdy and easy to move. I have over 300lbs of plates on it with plenty of room to add additional weight as needed. I bought the wheels that go with it so that I’d have the option of moving it around if needed. The wheels don’t lock so I was worried that the rack would move a bit taking the weights on and off but this things stays put; yet it still easy enough to move when you want it to. As another reviewer mentioned, the only thing that would make this better would be a barbell storage sleeve!
Date published: 2018-06-26
Rated 4 out of 5 by from Solid and sturdy plate tree I bought this rack knowing that it is a high-quality piece that can store a lot of plates. The solid build and welded storage posts are excellently designed. The powder coat is also good. The only drawback are the head and tail end of the bolts that stick out a bit on the lower-tier post. This prevents the plates from sliding all the way in, slightly reducing storage space. Also, I need to leave a tiny gap between the plates and the end of the bolts on the lower tier to prevent them from getting scratched up. This is a minor inconvenience that doesn’t take away from the overall quality of the weight tree. Overall, I give it 4 stars.
Date published: 2019-01-20
Rated 4 out of 5 by from Only one glitch Solid through and through. I would have given 5 stars if it wasn't for the bottom of the tree where the bolts stick out on one end that can potentially damage your plates if you're not careful and push the plates all the way, especially if you have a bunch to rack. I've attached pics to show what I mean and a simple remedy would be for Rogue to provide rubber caps or something to avoid the bolts from scratching your plates. Other than that, the Plate tree is amazing !!!
Date published: 2017-11-20
Rated 4 out of 5 by from Pretty Fantastic! Having recently purchased and assembled the tree, it does as intended and is sturdy. I have not considered the nut and bolt protruding to make contact with the bottom plates, as others have mentioned, but one recommendation is to leave the tree pegs with a simple non-abrasive coat. The interior ring on the metal plates will wear off, and it shows immediately after the first racking of the plates. If you care about that, consider something else. As I don't find that an issue because wear and tear will happen, my consideration is for easy racking and unracking; the plates won't go anywhere, so the pegs can be smooth. I assume Rogue does it because it's a lot faster to coat the entire thing in one go. I'll likely just sand them down. Otherwise, great product!
Date published: 2020-04-04
Rated 5 out of 5 by from Made in USA Perfect, excellent. The old fashioned plates tree with a touch of refinement as they said in the description. And it’s absolutely truth. Easy to ensamble, very sturdy, very stable, very tough and yet , all the welding, the powder coat, the plastic caps finishing every branch, all these details made with a lot of care, give a really refinement touch that can’t be overlooked. If you’re tired of ( made in China) and you are looking for something really genuine ( American made) this is for you. My deepest respect for the people that work in the factories making this plate tree. Knowing that just from metal scrap, they can bring to life something with such quality. Thank you very much Rouge.
Date published: 2019-05-24
Rated 5 out of 5 by from 5 star product even with having 3 issues Great Product. It does have 3 issues which have been pointed out in other reviews and which I made a video about which I posted below. Still the thing is solid and it takes less then 5 minutes to take it out of the box and assemble it. You could literally being watching the walking dead and during a commercial break put it together before the show comes back on. Overall I got to give it a 5 star rating for the quality of the product and how quickly rogue shipped it to me.
Date published: 2015-11-10
  • y_2020, m_9, d_24, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_114
  • loc_en_US, sid_PLATETREE2, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rogueapo