Online orders and operations are active. Retail store is closed. | Covid-19 Status

Rogue Weight Vest Plates

3.75LB Weight Vest Plate Pair
5.75LB Weight Vest Plate Pair
8.75LB Weight Vest Plate Pair

Rogue Weight Vest Plates

Rogue’s exclusive Weight Vest Plates were designed for use with the 5.11 TacTec Plate Carrier, but they’re also compatible with a wide range of other tactical training / weighted vests on the market.

A functional alternative to ballistic plates, these American-made, laser-cut steel vest plates are available in three size options, and can be purchased here in pairs or as part of a complete package with the 5.11 Tac Vest.

Rogue Weight Vest Plate Options:

  • 3.75 LB Plates - 12.125'" Tall, 10" Wide, 3/25" Thick Laser-Cut Steel, Medium Gloss Burnt Orange Powdercoat, Rogue logo branding. One pair inside a 5.11 Tac Vest will create a total vest weight of 10 LBS (this total will vary with other vest brands).
  • 5.75 LB Plates - 11.5" Tall, 10" Wide, 3/16" Thick Laser-Cut Steel, Medium Gloss Dark Red Powdercoat, Rogue "R" branding. One pair inside a 5.11 Tac Vest will create a total vest weight of 14 LBS (this total will vary with other vest brands).
  • 8.75 LB Plates - 11" Tall, 10" Wide, 5/16” Thick Laser-Cut Steel, Medium Gloss Dark Black Powdercoat, Rogue logo branding. One pair inside a 5.11 Tac Vest will create a total vest weight of 20 LBS (this total will vary with other vest brands).

IMPORTANT: These plates are meant to be used strictly as a fitness accessory and should never be used as body armor.

Fast Rogue Shipping

You can follow the progress of your package online via the Rogue Shipping Tracker.

Additional Specifications:

  • Made in the USA
  • Sold as Pairs
  • Laser-Cut Steel Construction
  • For use with 5.11 Tac Vest and/or other comparable weighted vests in the industry

See More: Weight Vest Gear Available from Rogue

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Various Colors
Length 12.125" (3.75LB), 11.5" (5.75LB), 11" (8.75LB)
Width 10"
Rogue Weight Vest Plates is rated 4.7 out of 5 by 143.
Rated 4 out of 5 by from Tape the edges I bought these plates a few months back to go with the Condor carrier. About a week into use the edges of the plates started ripping the material about half an inch outside of the mollee webbing on each side. The carrier was cinched down as tight as could be to reduce movement of the plates, but a couple of burs did some damage and I had to sew up the tears, and then I chose to use Gorilla tape around the edges of the plates to reduce the likelihood of the rips reopening. Learn from my mistake and do a little preventative work before inserting them. I'm curious to know if anyone else had the same problem, or if the 5.11 TacTec is just made of stronger material.
Date published: 2017-11-15
Rated 5 out of 5 by from Solid, Quality Vest Plates These plates are a great pairing with my 5.11 TacTec Plate Carrier. Really happy with how slim the plates are. Was concerned about how this would feel on the back in the event a WOD includes some kind of exercise laying on the ground, but it’s been awesome so far. Choosing the Rogue brand over others that are out there was easy. The MMA/Krav Maga/Shooting gym I am a part of uses all Rogue branded gear for the combat fitness workouts. I’ve seen that gear take a helluva beating and not falter. Once it came time to buy my plates, the decision was a no-brainer. Added a patch to my order as well. Can’t go wrong with a good ol’ patch!
Date published: 2018-12-12
Rated 3 out of 5 by from They work, but they could be much better. These plates fit great, my only complaint is the lack of curve. These would be much better if they where curved like real SAPI plates. That shape increases the comfort a great deal and spreads the pressure across the chest. Just my 2 cents
Date published: 2019-06-22
Rated 5 out of 5 by from Solid weight I purchased these for my condor plate carrier and they fit perfectly and comfortably. Working on endurance and strength training. It's a great combination.
Date published: 2019-05-24
Rated 5 out of 5 by from Expensive but worth the money. I purchased a pair of the 8.75lb laser cut plates in November and they were delivered a few days later. They were to be paired with the 5.11 Tactec plate carrier (I purchased this elsewhere for less than Rogue's price), as these products were the official ones of the CrossFit Games, to use for training and running. The plates fit the vest perfectly and, when secured correctly, do not move at all. I have worked out in my vest around 3 times per week for the past 2 months and the plates are still secure. They may be square but they are not uncomfortable in any way. I have run up to 8 miles (so far) with the plates in the carrier and no issues. There are much cheaper plate / carrier combos out there but these products are with the money if you can afford it.
Date published: 2019-01-31
Rated 5 out of 5 by from Built to last! Fast delivery and not bulky in the vest. Armor stays in place with sit ups, burpees, and running!
Date published: 2018-04-25
Rated 2 out of 5 by from Meh I'm disappointed these plates aren't contoured. The strictly flat shape makes them much less comfortable than they ought to be. It seems unlikely the other reviewers raving about the great fit have worn ceramic armor. Otherwise, the sizing is sensible and the build quality is high. Still probably the best option short of buying ballistic plates.
Date published: 2018-04-17
Rated 4 out of 5 by from These are about what you’d expect them to be They are very good at being weight vest plates. The only thing i would request is more higher weight options. They are a bit pricey for the weight you get but they are lower profile which helps the workout.
Date published: 2019-07-09
  • y_2020, m_5, d_18, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_143
  • loc_en_US, sid_VESTPLATES, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rogueapo