Rogue Vertical Bar Hanger

Special Price $32.50

Regular Price: $32.50

Rogue Vertical Bar Hanger

Vertical Barbell Storage Gets Elevated

Available as a single-bar or triple-bar storage accessory, the compact Rogue Vertical Bar Hanger is made in the USA from 3/16” thick laser-cut steel, with a protective UHMW plastic lining. Rather than sliding a barbell sleeve-first into a tube on the floor—like most standard vertical bar holders—this unit allows you to set up a wall-mounted or rack-mounted hanger that can store your bars efficiently above the ground, limiting the risk of any wear and tear during regular stowing and removal.

The UHMW lining helps prevent any harsh contact with the bar’s collar when you set it on the hanger, and additional UHMW plastic on the edge of the unit keeps each bar stabilized and secure when not in use.

The rack-mounted version of the Rogue Vertical Bar Hanger comes with all necessary hardware, and is intended for use only with Infinity or Monster Lite Series rigs and racks. For owners of a Rogue Fold Back Rack, the Vertical Bar Hanger is particularly versatile, as you can still store your bars on the outside of one of the panels when the rack is folded in. The Vertical Bar Hanger is NOT recommended for use with specialty bars.

Please Note: The wall-mounted version of the Vertical Bar Hanger does NOT come with hardware. The mounting holes are 3/8" in diameter, so we recommend using 5/16" diameter hardware.


  • Made in the USA
  • 1-Bar and 3-Bar storage options
  • 3/16” thick laser-cut and formed steel construction
  • Wall-Mount or Rack-Mount (compatible with Infinity or Monster Lite racks/rigs)
  • Mounting Hardware included ONLY for rack-mount version
  • UHMW plastic lining
  • Depth: 4.25” extension from mounting area
  • Length: Triple Bar - 12" / Single Bar - 6"
  • Height: 3”
  • NOT recommended for use with specialty bars or the Rogue Beater Bar

See More: Barbell Storage Options Available from Rogue

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Product Weight Triple Bar - 6LB
Single Bar - 3LB
Length Triple Bar - 12"
Single Bar - 6"
Width 4.25" (depth)
Height 3"
Other Product Specs Protective UHMW plastic layer
Steel Notes 0.1875" thick laser cut and formed steel
Infinity Compatible Yes
Monster Lite Compatible Yes
Rogue Vertical Bar Hanger is rated 4.7 out of 5 by 42.
Rated 5 out of 5 by from Excellent Vertical Barbell Storage We have two of these in our garage for our collection of barbells. Install was easy, I used 5/16 nuts, bolts, washers and lock washers. First I drilled 1 5/16 hole and placed a nut and bolt, leveled it out, drilled the remaining 3 pilot holes, then just bolt it in place. This doesn't come with any mounting hardware but nuts, bolts, washers can all be bought easily from a local hardware store. It fits our barbells with ease and has that plastic pad built in to protect the barbells from damage when being placed into the cradle. Doesn't fit the Axle bar due to the increased thickness of the handle. I prefer this to the gun rack storage. As you can see in the included pick, wall space is limited in our garage.
Date published: 2017-01-02
Rated 5 out of 5 by from Another solid product for organizing. Another perfect edition for the clean up project in my Garage gym. Very very solid, just make sure to cut a stringer if you have attach to drywall. I recommend using a 2x4 across the bottom. See pictures below but after the stringer of 3/4 inch plywood, it lines up perfectly with the bar. I want to be able to workout and put things away safely. I have a 2 and a 4 year old, both love to come out to the garage and monkey around. It is ultra important that I keep things cleaned up and safely stored. First was the Rower Hanger released, put that up and was ultra happy. Then the Bar holder was released. I had seen the gun rack ones and almost bought those a long time ago, but this is a better option for my space. Keep up with the organizing products.
Date published: 2016-02-27
Rated 3 out of 5 by from It works, but..,, This works well, I really like the UHMW to protect barbells. Hanging vertical is the most out of the way place for spare barbells. I wish Rogue had made the back of the hanger longer to mount in the studs of my garage. The hanger is shorter than the 16" span between studs, hanging 135 pounds from drywall or from one stud seems like a bad idea. So I had to spend a couple more bucks and hours making my own extension to hang this in my garage.
Date published: 2017-09-05
Rated 4 out of 5 by from Great Product While I love the product, and it's low profile, I could see value in it being wide enough to span a standard 16"w stud spacing. This would allow for a 4th bar storage, and remove the need to add a stringer bar. I would have also liked to see it show up assembled with all of the vinyl pads, rather than having to dig out my Allen wrench and screw it all together. All of that said, it's a beefy product that looks clean, and does it's job.
Date published: 2017-10-23
Rated 3 out of 5 by from It's nice but ... Nice but I wish it was sized wide enough to be bolted in 16"OC to accommodate framing practices. I mounted mine in my basement gym and had to put a piece of finished lumber on my nice shiplap wall in order to mount this as it's just not wide enough.
Date published: 2017-10-11
Rated 4 out of 5 by from vertical barl hanger this hanger is great. the only thing that would make them 5 star is if the mounting plate were wider to accommodate wall studs, OC 16".
Date published: 2017-12-04
Rated 4 out of 5 by from Well made, needs hardware The hanger itself is great, and does exactly what it is meant to, but it was a bit inconvenient to then have to get my own hardware for wall mounting. In theory, all hardware is standard, but that's not ever truly the case so it would be worth an extra couple bucks to have said hardware included that is *known* to fit.
Date published: 2018-02-02
Rated 4 out of 5 by from Very sturdy olympic barbell holder I do like this product. It looks great in my gym, I just wish it came with some supplies to wall mount the holder. I used a 1x4 for the top, to place the holder on and I used a 2x4 for the bottom so it will not damage the wall.
Date published: 2016-07-30
  • y_2019, m_10, d_20, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_42
  • loc_en_US, sid_RA094, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rogueapo